Description

IAR KickStart Kit for LPC2129E contains all the necessary hardware and software and allows you to develop and test your applications:

• LPC2129E development board
• 20-state version of visualSTATE
• IAR Embedded Workbench with a 32KB version of the ARM C/C++ compiler

LPC2129E Development board

• MCU: LPC2129 16/32 bit ARM7TDMI-S™ with 256K Bytes Program Flash, 16K Bytes RAM, RTC,4x 10 bit ADC 2.44 uS, 2x UARTs, I2C, SPI, 2x 32bit TIMERS, 2x CAN, 7x CCR, 6x PWM, WDT, 5V tolerant I/O, up to 60MHz operation
• CS8900 Ethernet interface
• Two general purpose buttons
• Potentiometer connected to analog input 0
• Dallas i-button interface
• 24LC515 EEPROM for external web storage
• Standard JTAG connector with ARM 2x10 pin layout for programming/debugging with ARM-JTAG
• Two on board voltage regulators 1.8V and 3.3V with up to 800mA current
• Single power supply: +5VDC required
• Three LAN status LEDs, three general purpose status LEDs
• Power supply filtering capacitor
• USB to RS232 interface
• RESET circuit with external control of Philips ISP utility via USB/RS232
• RESET button
• DBG jumper for JTAG enable
• BSL jumper for bootloader enable
• JRST jumper for enable/disable external RESET control by RS232
• 14.7456 MHz crystal
• Extension header for all uC ports
• PCB: FR-4, 1.5 mm (0,062"), green soldermask, white silkscreen component print
• RoHS compliant
• Dimensions: 80x90 mm (3.15x3.55")

An IAR J-Link-KS JTAG Emulator to use with this board is also available in this section of the shop