Description

IAR J-Link KS is an OEM version of the Segger J-Link v6.0.

Limitations:

IAR J-Link KS can not be used with Keil MDK. This limitation can NOT be lifted. IAR J-Link-KS provides power through pin 19 for IAR Kickstart Kits, however this can be switched off in firmware. No licenses are included. All Segger J-Link licenses can be added, and are available on this shop.

IAR J-Link USB-driven JTAG/SWD interface for ARM

IAR J-Link for ARM is a small JTAG/SWD hardware debug probe; it connects via USB to the PC host running Windows. IAR J-Link integrates seamlessly into IAR Embedded Workbench and is fully plug-and-play compatible:

• Any ARM7/ARM9/ARM11/Cortex-M3 core supported, including both JTAG and SWD.
• Download speed up to 600 KB/sec *
• DCC speed up to 800 KB/sec *
• Seamless integration into IAR Embedded Workbench
• No power supply required, powered through USB
• Max. JTAG speed 12 MHz
• Automatic core recognition
• Auto speed recognition
• All JTAG signals can be monitored, target voltage can be measured
• Support for multiple devices on scan chain
• Fully plug and play compatible
• 20-pin standard JTAG connector
• Optional adapter for 5V targets available
• USB and 20-pin flat cable included
• Wide target voltage range: 1.2V - 3.3V, up to 5V with optional adapter.
• Delivered with power on pin 19 with the ability to turn it off in the software
• SWD support
• Optional power on pin 19, default is power on Outputs can be tristated (Effectively disabling the JTAG interface)
• Support for ETB

* Measured with ARM7 at 50 MHz, 12MHz JTAG speed.